Red Barn Customs L.L.C.
LUKE MUD WALKER
RBC HOME
CUSTOM ROCKWELL RIMS
COIL OVER SHOCKS/4 LINK PARTS
SWAY BARS & PARTS
HEIM JOINTS-4 LINK BRACKETS
LEAF SPRINGS & BRACKETS
2.5 TON ROCKWELL PARTS
2.5 TON COMPLETE AXLE
2.5 TON CHUNKS/GEAR SETS
2.5 TON  LOCKERS/GEAR SETS
2.5 TON AXLE SHAFTS
2.5 TON BEARING/RACES
2.5 TON BOOTS & SEALS
2.5 TON  BRAKES
5 TON ROCKWELL PARTS
SCS TRANSFER CASE
DRIVE SHAFTS & PARTS
YOKES & FLANGES
HYDRAULIC STEERING
1991 RED/WHITE CHEVY TRUCK

RBC 2.5 TON ROCKWELL BRAKE KITS

***ALL PARTS RBC SELLS ARE FOR OFF ROAD USE ONLY***

CONTACT US AT 810-650-8641

ASK FOR: PARTS TO PLACE AN ORDER

OR

SERVICE FOR ANY QUESTIONS

**ALWAYS HIT F5 ON YOUR KEY BOARD TO UPDATE OUR PAGES ON YOUR SCREEN**



2.5 TON ROCKWELL RBC PINION PLATE

KEEP THE MUD OUT OF YOUR OPEN FLANGE. THIS PLATE WILL GIVE IT A CLEAN LOOK

COMES WITH ALL NEW GRADE 8* HARDWARE.

(BARE STEEL, RED, OR BLACK)

$25.00 EACH PICTURE IS BELOW 

"WE NOW HAVE" FOR THE SAME PRICE 

"THE CHEVY LOGO"

"THE FORD OPEN OVAL"

"THE MOPAR-M"

CALL FOR DETAILS


WE RECOMMEND THAT YOU USE THESE CUSTOM BRAKE LINES AND FITTINGS. THE MOST COMMON SIZES ARE

DASH 3 AND DASH 4 

RBC STAINLESS STEEL BRAKE LINES & FITTINGS

48" STAINLESS STEEL BRAIDED LINE ONLY

 $75.00 EACH


RBC WILL SOON HAVE A RBC-X "DIY PINION BRAKE KIT"


 

 *** 2.5 TON ROCKWELL PINION BRAKE SECTION ***

 RBC STANDARD 4 PISTON CALIPER PINION WITH 11 3/8" DIAMETER ROTOR BRAKE KIT


 

 

 



BRAKE HOSE 10MM X 1.50 MM

THIS WILL VARY FROM MANUFACTURE COULD BE 1.00 MM OR 1.75 MM ALSO PLEASE CHECK YOURS

 

RBC KIT COMES WITH

(1) 4 PISTON CALIPER WITH EQUAL SIZE PISTONS

(1) 11 3/8" DIAMETER MACHINED ROTOR

(1) SET OF PADS

(1) SET OF PINS & SPRINGS

(1) SET OF ROTOR SHIMS

(1) MOUNTING BRACKET 

(1) CENTER PLATE WITH YOUR CHOICE OF 4 LOGO'S

 ***INCLUDED NOW WITH KIT FOR THE SAME PRICE WILL BE***

"THE CHEVY LOGO" , "THE FORD OPEN OVAL" , "THE MOPAR-M" OR "PLAIN" PLATE

THIS BOLTS ON THE CENTER OF THE ROTOR AND LOOKS REALLY COOL

(BACK TO 2006 PRICES -NEW 02-08-16)

 

$275.00 EACH

ADDITIONAL UPGRADE PARTS

UPGRADE WITH A (1) GRADE 8* BOLT KIT $25.00 EACH

(SPECIFY DRIVE SHAFT OR NO DRIVE SHAFT SIDE-BOLT KIT IS DIFFERENT)

UPGRADE WITH A (1) SHORT 7" RUBBER BRAKE HOSE $18.43 EACH

 

 

 

REPLACEMENT PARTS FOR THE RBC STANDARD KIT

RBC 4 PISTON CALIPER $85.00 EACH

YOUR OLD CALIPER CORE OR CORE FEE $50.00 EACH

RBC PADS (SET OF 2)  $44.62

RBC MACHINED ROTOR $100.00 EACH


RBC'S 2.5 TON ROCKWELL WILWOOD PINION BRAKE KIT

(1) WILWOOD GT-36V/SPEC 37-HIGH TEMP IRON ROTOR @ 11.750" DIAMETER X .810" THICK

(1) "INCLUDED BILLET ADAPTOR PLATE" FOR THE PINION OR DRIVE SHAFT BRAKE KIT

(PLEASE SPECIFY FOR KIT)

(1) GRADE 8* YELLOW ZINC PLATED BOLT/HARDWARE KIT

(1) HIGH TEMP GT-DYNA LIGHT 4 PISTON CALIPER WITH (4) 1.750" DIAMETER PISTONS

(2) & HIGH TEMP POLY MATRIX 1000* F PLUS PADS.

**OUR NEW KITS ARE DEVELOPED FROM OVER 10 YEARS OF TESTING

AND WE USE THE HIGHEST QUALITY OF HIGH TEMP WILWOOD PARTS**

 $595.00 EACH KIT

 

REPLACEMENT PARTS RBC WILWOOD KITS   

(1) WILWOOD GT-36 CURVED VANED ROTORS $179.14 EACH 

(2) WILWOOD POLY MATRIX 1000*F PADS $59.87 SET OF 2

(1) WILWOOD FORGED DANA LIGHT 4 PISTON CALIPER $185.98 EACH

 



*ALL PRICE'S SUBJECT TO MARKET CHANGE*